Isothermal Modelling of the Adsorption of Chromium onto Calcium Alginate Nanoparticles
DOI:
https://doi.org/10.54987/jemat.v9i2.607Keywords:
Biosorption, Chromium, Isotherm, Calcium alginate nanoparticles, LangmuirAbstract
Because of its extensive usage in industrial applications such as leather tanning, metallurgy, electroplating, and refractory materials, chromium is one of the most dangerous trace elements introduced into surface and ground waters. The sorption isotherm of chromium sorption onto calcium alginate nanoparticles were analyzed using ten models—Henry, Langmuir, Dubinin-Radushkevich, Freundlich, BET, Toth, Sips, Fritz-Schlunder IV, Baudu and Fritz-Schlunder V, and fitted using non-linear regression. Only the Toth and Fritz-Schlunder V models were unable to fit the data. Statistical analysis based on root-mean-square error (RMSE), adjusted coefficient of determination (adjR2), bias factor (BF), accuracy factor (AF), corrected AICc (Akaike Information Criterion), BIC and HQC showed that the Langmuir model was the best model in terms of overall best criteria. The calculated evidence ratio was 7 with an AICc probability value of 0.87 indicating that the best model was at least 7 times better than the nearest best model, which was Freundlich. The calculated Langmuir parameters qmL value of 79.174 mg/g (95% confidence interval from 50.702 to 107.646) and bL value of 0.332 L/mg (95% confidence interval from 0.294 to 0.371) is not much different from the linearized published work for the qmL value of 145 mg/g but lower than the bL value of 0.34 L/mg. The nonlinear regression method allows for the parameter values to be represented in the 95% confidence interval range which can better allow comparison with published results.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
